Genesis BH Vinyl Wrap Review: Interior Upgrade

Revitalizing the Genesis BH Interior with a Vinyl Wrap

Many Genesis BH owners, especially younger ones, find the factory wood trim can lend an older, less contemporary feel to an otherwise luxurious cabin. This was precisely the case for a 20-something owner who visited a detailing shop in Daejeon, South Korea, seeking to modernize their vehicle's interior. The goal: to replace the dated 'grandfather wood' trim with a sleek, modern finish. This review delves into the process, cost, and results of applying a 3M Black Brush vinyl wrap to the interior of a Genesis BH, offering insights for those considering a similar car wrap or paint alternative.

The Vinyl Wrap Transformation: Process and Materials

The interior vinyl wrap project on this Genesis BH focused on replacing the wood grain accents with a sophisticated 3M Black Brush film. This material offers a distinct brushed metal texture with a subtle sheen, providing a contemporary aesthetic that complements the car's premium feel. The process began with the careful removal of the center fascia wood trim pieces. Detaching these components allows for a more meticulous and cleaner application of the vinyl wrap, ensuring all edges are perfectly sealed. For the door trims, the decision was made to wrap them externally, depending on the specific vehicle condition and ease of access. Before applying the vinyl, the trim surfaces were thoroughly cleaned to remove any dust or debris, which is crucial for optimal adhesion. The 3M Black Brush film was then precisely cut to match the dimensions of each trim piece. Using heat, the vinyl was carefully stretched and molded to conform to the contours and curves of the trim, a critical step that requires skill to achieve a seamless finish without wrinkles or bubbles. Finally, the edges were trimmed for a clean look, and the components were reinstalled, completing the transformation.

Before & After: A Modern Genesis BH Interior

The impact of the vinyl wrap on the Genesis BH's interior is dramatic. The once-prominent wood trim has been completely replaced by the elegant 3M Black Brush film, imbuing the cabin with a modern and refined atmosphere. Areas like the gear selector and center console now boast a metallic texture, significantly enhancing the perceived luxury. The dashboard also appears cleaner and more cohesive, with the wrap meticulously applied around buttons and controls, boosting the overall fit and finish. Even the rear seat armrest and cup holder areas received the same treatment, ensuring a uniform and upscale look throughout the cabin. This color change wrap effectively updated the vehicle's interior, aligning it with the owner's desire for a more stylish and youthful ambiance. While the exact vinyl cost for this specific project in Korea was between 300,000 and 600,000 KRW (approximately $220-$440 USD, depending on the exchange rate and specific shop), the visual upgrade is substantial. For US/UK readers, expect similar interior wrap installations to range from $400 to $800, depending on the vehicle's complexity and the chosen material.

Installation Process:

1. Carefully remove interior trim pieces (e.g., center fascia, door panels).
2. Thoroughly clean all surfaces to ensure proper adhesion.
3. Precisely cut the vinyl film to fit each trim piece.
4. Apply the vinyl using heat to stretch and conform to curves, ensuring a smooth finish.
5. Trim edges cleanly and reinstall all components.