Genesis EQ900 Window Tinting Review: Premium IR Film

Genesis EQ900 Solar Gard IR Window Tinting: Why Upgrade Now?

For a premium sedan like the Genesis EQ900, maintaining its condition is crucial to preserving its value. When the existing window tint begins to fade, it not only leads to increased interior temperatures but can also damage the upholstery. Upgrading to Solar Gard IR window film for your Genesis EQ900 is a necessary step for optimal comfort and protection.

Key Takeaways from this Review:

• Protecting rear defroster lines during tint removal.
• Features and benefits of Solar Gard Vortex IR film.
• Pricing and longevity of high-performance heat-rejecting tint.
• Post-installation care for your new window film.

Vehicle: Genesis EQ900
Service: Full Window Tinting Reapplication
Product Used: Solar Gard Vortex IR
Areas Covered: Front/Rear Windshield, Side Windows
Installation Location: Today's Car Goyang Branch
Approximate Time: 4-5 hours (including old tint removal)

Removing Old Tint on EQ900 Without Damaging Rear Defroster

The meticulous care taken during any service on a luxury vehicle like the Genesis EQ900 directly impacts its overall value. Over time, older window tints oxidize, causing them to fade, and the adhesive hardens, making removal difficult. For the EQ900, the rear windshield features a defroster grid (heating elements), which requires extreme caution during the removal process to prevent damage.

While heat guns are sometimes used for tint removal, they pose a risk to the defroster lines due to high temperatures. Professional shops often opt for a low-temperature steam method. The steam's moisture gently softens the film and adhesive, allowing for a gradual separation without stressing the delicate defroster elements. This technique ensures the old film is removed cleanly while preserving the integrity of the rear window's heating system.

The Importance of Removing Residual Adhesive After Tint Removal

The work doesn't end with film removal; the crucial step is addressing any remaining adhesive residue. Leaving behind glue remnants can lead to bubbles or poor adhesion for the new window film. This is particularly common around the defroster lines on the rear and side windows. Specialized adhesive removers and cloths are used to meticulously clean the glass. This involves applying the remover generously and scrubbing until all traces of the old glue are gone, ensuring a perfectly smooth surface for the new film's application. This thorough cleaning process is a key indicator of an installer's experience and attention to detail.

Solar Gard Vortex IR: Setting the Standard for Heat-Rejecting Window Film

Solar Gard Vortex IR stands out as a premier choice for heat-rejecting window tinting. Unlike conventional tints that primarily block visible light, IR films are engineered to block a significant portion of infrared (IR) rays – the primary source of heat. Vortex IR film can block up to 99% of solar heat, dramatically reducing the interior temperature of your Genesis EQ900 by an estimated 5-7 degrees Fahrenheit during hot weather. This leads to less reliance on the air conditioning system, potentially improving fuel efficiency. The deep black color of Vortex IR complements the sophisticated aesthetic of luxury sedans like the EQ900, offering powerful performance without compromising style.

The Window Tinting Process for the Genesis EQ900

The sequence of application is important for a flawless finish. Typically, the installation proceeds in the following order: rear windshield, rear side windows, front side windows, and finally, the front windshield. The rear window is addressed first due to the complexity of the defroster lines and its curved nature, where even minor errors can be highly visible. The side windows, being the largest, are then tackled, followed by the front windshield, which requires the most precision due to its visibility and curvature.

Installation Process:

1. Surface Preparation: Thoroughly clean all windows, removing old tint and adhesive residue.
2. Film Cutting: Precisely cut the window film to match the exact dimensions of each window, often using specialized software and plotters.
3. Application: Carefully apply the film to the interior side of the glass, using a squeegee to remove water and air bubbles, ensuring a smooth, edge-to-edge finish.
4. Curing: Allow the film to cure completely, which typically takes 24-48 hours, during which time the windows should not be rolled down.