Hyundai Palisade Window Tinting Review: Premium Non-Reflective Fi

Hyundai Palisade Window Tinting: Choosing the Right Film

Before getting your car tinted, understanding the differences between film types and their performance is crucial. This review details a Hyundai Palisade window tinting upgrade from standard reflective tint to a high-end non-reflective film. The choice of film significantly impacts both the vehicle's appearance and its functionality.

Key Details of This Tinting Service:
• Vehicle: Hyundai Palisade
• Service: Full Window Tinting (Front Windshield + Sides/Rear)
• Film Type: Premium Non-Reflective Film (IR 99%, TSER 60%+)
• Tint Levels: 28% (Front), 6% (Sides/Rear)
• Estimated Time: Approx. 4 hours (including wait time)
• Location: Today's Car Gwangju Branch

Non-Reflective vs. Reflective Window Film Explained

Many car owners assume all window tints are the same, but there's a significant distinction between reflective and non-reflective films. Reflective tints work by bouncing sunlight away, offering heat rejection but creating a mirror-like exterior. Non-reflective films, like the one used in this Palisade tinting, absorb light, providing a deep, true black appearance from the outside without the mirrored effect.

Premium Non-Reflective Film: IR 99% and Lifetime Warranty

The film applied to this Palisade boasts an impressive IR (Infrared Rejection) of 99% and a TSER (Total Solar Energy Rejected) of over 60%. High IR rejection is key to preventing excessive heat buildup inside the car during hot weather. While basic films might offer 70-80% IR rejection, this 99% level blocks the vast majority of heat-causing infrared rays. This leads to reduced reliance on the air conditioning system, potentially saving fuel.

Furthermore, the film comes with a lifetime warranty, indicating the manufacturer's confidence in its quality and durability. Unlike standard tints that might degrade or bubble within 3-5 years, this warranty suggests the film is resistant to issues like discoloration, peeling, and bubbling for the life of the vehicle.

Window Tint Installation Process for the Palisade

The window tinting process for the Palisade involves meticulous steps to ensure a flawless finish. Installation typically takes around 4 hours, including preparation and curing time.

1. Surface Preparation: The glass is thoroughly cleaned to remove any dust, dirt, or residue. This is critical, as even microscopic particles can cause imperfections under the film.
2. Film Cutting and Application: The window film is precisely cut to match the shape of each window. For curved windshields like the Palisade's, specialized techniques are used to ensure the film conforms perfectly without creases. A slip solution is applied to the glass and film, allowing for adjustments before final placement.
3. Squeegee and Air Removal: Using specialized squeegees, the installer carefully pushes out the slip solution and air bubbles from between the film and the glass, ensuring complete adhesion. This is done slowly and methodically to avoid trapping air.
4. Edge Sealing and Curing: The edges of the film are trimmed for a clean finish, and heat may be applied to help the film set. The windows should remain closed for a recommended period (usually 24-48 hours) to allow the tint to fully cure and bond to the glass.

For the front windshield, a 28% tint level was chosen. This percentage refers to the Visible Light Transmission (VLT), meaning 28% of light enters the cabin. This offers a balance between driver visibility and effective heat rejection. The side and rear windows were tinted to 6%, providing maximum privacy and heat control.