Genesis BH Vinyl Wrap Review: Cost & Before/After Results

Genesis BH Vinyl Wrap: A Fresh Look for a Classic Sedan

Considering a refresh for your older Genesis BH? This luxury sedan, while still possessing a strong presence, can sometimes feel dated. One effective way to revitalize its appearance and protect the original paint is through a full exterior and partial interior vinyl wrap. This review details a specific Genesis BH project, covering the installation process, the impressive before-and-after results, and key considerations for anyone contemplating a car wrap.

The Transformation: From Silver to Satin Dark Gray

The owner of this Genesis BH, purchased used, felt the original silver paint and wood trim were looking a bit tired. To combat this, they opted for a comprehensive vinyl wrap. The exterior was transformed with Avery Satin Dark Gray, a sophisticated choice that offers a modern aesthetic while effectively concealing minor scratches and imperfections that accumulate over time. While it's a silver-based hue, the satin finish provides a depth and elegance that significantly elevates the car's presence. The interior also received a facelift, with the wood trim being replaced by a crisp white wrap, injecting a fresh, contemporary feel into the cabin.

A crucial, often overlooked step in any vinyl wrap installation, especially on older vehicles, is meticulous preparation. This involves a thorough cleaning to remove all dirt, grime, and contaminants from the surface. For this Genesis BH, parts like the headlights, grille, and side mirrors were carefully removed to ensure a seamless wrap application. A particular challenge was addressing areas where the owner had previously attempted a DIY paint job with spray paint. These areas required careful cleaning and smoothing to prevent the vinyl from lifting or showing imperfections underneath. Proper surface preparation is paramount for achieving a high-quality, long-lasting finish.

The interior wrap, while covering a smaller area, demands precision. The white wrap chosen for the trim pieces, while stylish, is prone to showing dirt. Therefore, the application and finishing had to be exceptionally clean and neat. The grille, due to its complex curves, was not wrapped but instead sent out for a professional gloss black paint job. This method ensures a smoother, more integrated look than wrapping could achieve on such intricate parts. While the wheels were not part of this specific upgrade, they remain an option for future customization.

Installation Process: Key Steps for a Flawless Finish

1. Deep Cleaning and Surface Preparation: Thoroughly wash and decontaminate the vehicle's exterior and interior surfaces. Remove any existing paint or imperfections.
2. Component Disassembly: Carefully remove exterior trim pieces, lights, and badges to allow for a clean wrap edge.
3. Vinyl Application: Precisely cut and apply the vinyl wrap, using heat and specialized tools to conform to the vehicle's curves and contours without stretching or tearing.
4. Trimming and Sealing: Trim excess vinyl and carefully tuck edges into panel gaps or around trim for a factory-like finish.
5. Post-Installation Inspection: Check for any bubbles, lifting, or imperfections and address them.

The entire process, including the grille painting, took approximately 2-3 days, depending on the vehicle's condition and the specific client requests. The result is a Genesis BH that looks and feels significantly newer, boasting a sophisticated satin dark gray exterior and a refreshed, modern interior. This vinyl wrap service, performed at a facility in South Korea, demonstrates the dramatic impact a color change wrap can have on an older vehicle, offering a compelling alternative to a costly repaint.