Hyundai Stinger Wheel Repair & Painting Review

Customizing Your Hyundai Stinger's 19-Inch Wheels

For Hyundai Stinger owners looking to refresh their vehicle's appearance, wheel repair and custom painting offer a dramatic transformation. This review details a specific project where the owner of a Stinger equipped with 19-inch TUIX wheels wanted to move beyond the standard matte black finish. The goal was to achieve a striking gloss black base with a vibrant red accent on the rim, creating a unique two-tone look that significantly enhances the car's aesthetic.

The Wheel Restoration and Two-Tone Painting Process

The process begins with a thorough assessment and repair of any existing damage. Minor scratches and chips are meticulously addressed as part of the standard repair. For more severe damage, such as significant dents requiring welding, additional charges may apply. Once the wheel surface is perfectly restored, a specialized gloss black powder coating is applied. Powder coating is favored for its superior durability and finish quality compared to traditional paint methods. It involves electrostatically applying powdered paint, which is then cured under high heat.

Following the base coat, the intricate two-tone application takes place. This involves carefully masking the gloss black areas before applying the custom red paint to the rim edges. This multi-stage process demands precision and extra time but yields a visually stunning result. After the painting is complete, the wheels undergo a high-temperature drying process. Once cooled, a final finishing step, often involving a clear coat for added gloss and protection, is applied and smoothed out through a meticulous polishing process. The final result is a mirror-like finish that reflects the surroundings, showcasing the quality of the work.

Protecting Your Investment: Final Steps and Durability

To ensure the freshly painted wheels remain pristine, they are carefully wrapped for protection against contaminants and damage during reassembly. Tires are then safely mounted, completing the installation. The durability of this type of custom wheel refinishing, especially with high-quality powder coating and clear coats, can last for 3-5 years or more with proper care. Regular washing with mild wheel cleaners and avoiding harsh chemicals are key to maintaining the gloss and color integrity over time.

Installation process:

1. Damage Assessment & Repair: Inspect wheels for scratches, dents, or bends and perform necessary repairs, including welding if required.
2. Surface Preparation: Thoroughly clean and sand the wheel surface to ensure optimal adhesion for the new paint.
3. Powder Coating Application: Apply the base gloss black powder coat electrostatically and cure it under high heat.
4. Custom Two-Tone Painting: Carefully mask the gloss black areas and apply the custom red accent color to the rim.
5. Finishing & Curing: Apply a protective clear coat, followed by a final curing process and polishing for a high-gloss finish.

The cost for such custom work on a set of four 19-inch wheels can range significantly. While a single wheel repair and single-color refinishing might cost between ₩150,000 to ₩300,000 (approximately $115-$230 USD) for standard sizes, custom two-tone jobs like this, especially on larger 19-inch wheels, can range from ₩800,000 to ₩1,500,000 or more (approximately $600-$1150 USD) for the set. The process typically requires 2-3 days due to the multiple layers and curing times involved.