Kia K5 DL3 Vinyl Wrap Review: Emblem Removal & Partial Wrap

Kia K5 DL3: Expressing Individuality

The Kia K5 DL3 boasts a sleek design, but many owners find it too common. This review details how emblem removal and partial vinyl wrapping can emphasize personal style. At Ojun-ui-Car Gwanggyo, we go beyond simple application to create a custom look reflecting the owner's taste. This is the answer for K5 owners asking, "How can I express my unique style?"

Understanding the K5 DL3 for Superior Application

The K5 DL3's hood and trunk feature smooth curves, making emblem removal marks noticeable. Specifically, removing the hood emblem leaves two holes that significantly impact the final appearance. The transition between the rear bumper and trunk lid on the K5 DL3 requires delicate manual work for a seamless wrap or PPF installation.

Unlike typical sedans, the K5 DL3's rear bumper has a deep curve at the bottom, prone to material creasing. Achieving a natural finish requires heat molding (using heat to soften and stretch the material), not just simple adhesion. Ojun-ui-Car Gwanggyo accurately understood these vehicle-specific characteristics.

Three-Step Customization Process

1. Emblem Removal: The hood emblem's retaining screws were removed from the inside. The area around the emblem was gently heated for 3-5 minutes before a scraper tool was used to slowly lift it. Allowing the adhesive to soften is crucial to prevent damaging the hood's surface. This step took approximately 15-20 minutes.

The hood surface was left smooth, with minimal traces of the emblem. The two remaining holes were intentionally left for future customization.

2. Gloss Black Rear Bumper Wrap: A gloss black vinyl wrap was applied to the lower rear bumper, a key area for transforming the car's aesthetic. The area was degreased, and air bubbles were removed. The gloss black film provides a paint-like finish.

During application, heat was used to mold the film to the bumper's curves, especially around the edges, to prevent wrinkles. This process took about 30-40 minutes. The wrapped area should avoid water for 24 hours.

3. Trunk Lid PPF Protection: Finally, Paint Protection Film (PPF) was applied to the upper trunk lid. PPF is a transparent film that shields the paint from scratches and UV rays. It has self-healing properties, making minor scratches disappear over time.

The trunk lid is highly exposed to sunlight, making PPF application highly recommended. The process is similar to wrapping but requires more precise adhesion. This step took approximately 1-2 hours, with a 48-hour full curing time.

The total installation time for all three services is about 3-4 hours, with completion taking around two days including drying. Costs vary: emblem removal is approximately ₩50,000-₩100,000, partial bumper wrap ranges from ₩600,000-₩1,000,000, and trunk lid PPF is typically ₩800,000-₩1,200,000. Prices depend on the scope and film grade.

Before & After: The Transformation

The combination of emblem removal and strategic partial wraps dramatically alters the K5 DL3's appearance. The gloss black bumper adds a sporty, aggressive look, while the PPF protects a high-wear area. These customizations allow the K5 DL3 to stand out from the crowd, reflecting the owner's unique taste.