Lincoln Aviator Vinyl Wrap Review: Cost & Results
Service Price
$40–80
Estimated price · Actual price may vary by shop
Lincoln Aviator interior wrap: Approx. $300-$600. Protects high-gloss trim from scratches and fingerprints with a stylish finish.
Lincoln Aviator Interior High Gloss Wrap: Protection and Style
The pristine, glossy interior of a new car adds a touch of luxury, but high-gloss finishes are notoriously susceptible to fingerprints, dust, and minor scratches. This is especially true for frequently touched areas like the center console and cup holders. One Lincoln Aviator owner faced this common dilemma and sought an interior wrap solution to preserve the car's refined aesthetic. This review details the process of applying a vinyl wrap to the interior of a Lincoln Aviator, focusing on how it combats the inherent flaws of high-gloss surfaces and elevates the cabin's overall ambiance. The service was performed at 'Today's Car' in Incheon, South Korea, with an approximate cost of ₩400,000 - ₩800,000 (roughly $300 - $600 USD, depending on the specific panels and film chosen).
Why Interior Wraps are Essential for High-Gloss Surfaces
High-gloss trim, while visually appealing, presents practical challenges. It easily shows smudges and can develop hairline scratches from everyday use, detracting from the vehicle's premium feel. Unlike exterior paint, these interior scratches are difficult to polish out and can be a constant source of annoyance. Consequently, many car owners opt for protective measures like interior PPF (Paint Protection Film) or vinyl wraps to safeguard these delicate surfaces. This Lincoln Aviator owner decided on an interior wrap using 3M 2080 Brush Film, a material chosen not only for its protective qualities but also for its ability to transform the interior's look. The wrap was part of a comprehensive vehicle care package, including exterior detailing, polishing, and ceramic coating.
The Vinyl Wrap Installation Process for a Lincoln Aviator Interior
A flawless vinyl wrap installation begins with meticulous preparation. The surfaces intended for wrapping must be thoroughly cleaned and degreased to ensure optimal adhesion. Any remaining oils, dirt, or dust can lead to lifting or bubbling of the film. The technicians at 'Today's Car' emphasized repeating this cleaning and degreasing process multiple times. Following preparation, surrounding areas are carefully masked with tape to prevent dust contamination during the wrap application and to protect adjacent components from any potential damage during cutting or adjustments. This attention to detail is crucial for achieving a high-quality finish on the Lincoln Aviator's interior panels.
Next comes the precise cutting and application of the vinyl film. Applying the wrap to the Aviator's large and complex high-gloss panels requires significant skill and concentration. The 3M 2080 Brush Film, with its distinct grain, presents a higher level of difficulty compared to standard films. It's essential to maintain a consistent grain direction throughout the installation and handle the film carefully with heat to prevent tearing. The installer first visualized the entire process before carefully positioning the film onto the panel. Using a squeegee, they worked to eliminate any air bubbles, ensuring a smooth, flush finish. For curved areas, a heat gun was used to make the film pliable, allowing it to conform perfectly without lifting. This installation was performed without removing interior parts, demanding extra caution to achieve maximum quality while minimizing the risk of component damage often associated with disassembly.
Installation Process:
- Surface Preparation: Thoroughly clean and degrease all interior high-gloss surfaces to remove contaminants.
- Masking: Protect surrounding areas with masking tape to prevent dust ingress and potential damage during cutting.
- Film Application: Carefully apply the pre-cut vinyl film, using heat to conform it to curves and a squeegee to ensure a bubble-free, smooth finish.
- Finishing Touches: Trim excess film precisely and ensure all edges are sealed for a durable, clean look.
The result is a transformed interior that not only looks sleek with the brushed finish but is also protected from the daily wear and tear that plagues high-gloss trim. The owner reported high satisfaction with the improved durability and aesthetic appeal of their Lincoln Aviator's cabin.
Frequently Asked Questions
Q. How much does a vinyl wrap cost for a Lincoln Aviator?
The interior vinyl wrap for this Lincoln Aviator in Korea cost approximately ₩400,000 - ₩800,000 (around $300-$600 USD). Typical US pricing for a full exterior car wrap can range from $2,500 to $5,000 or more, depending on the vehicle and film.
Q. How long does a vinyl wrap last on a Lincoln Aviator?
A quality vinyl wrap, like the 3M 2080 film used here, can last 3-5 years or even longer with proper care. To maintain its appearance, regularly clean the wrap with mild soap and water, avoiding abrasive materials.
Q. Does vinyl wrap damage paint on a Lincoln Aviator?
When applied and removed correctly by a professional, vinyl wrap generally does not damage the original paint on a Lincoln Aviator. In fact, it can protect the paint from minor chips and scratches.
Q. How is vinyl wrap applied to a Lincoln Aviator?
Vinyl wrap installation involves meticulous surface preparation, including thorough cleaning and degreasing. The film is then precisely cut and applied to the vehicle's panels, using heat to conform to curves and a squeegee to ensure a smooth, bubble-free finish.
Q. What is the difference between vinyl wrap and a repaint for a Lincoln Aviator?
Vinyl wrap is a temporary, protective layer applied over the original paint, offering color change and protection without altering the factory finish. Repainting is a permanent alteration of the vehicle's color and finish, often more costly and time-consuming.
OhCar Partner Shop
More vinyl wrap Reviews
See all →
More Lincoln Reviews
Pair with Another Service
PPF edges before wrapping for durability
