Genesis GV70 PPF Review: Premium Interior Protection

Protecting Your Genesis GV70's Interior with PPF

The Genesis GV70 is a luxury sedan featuring a sophisticated interior with premium leather, advanced touch panels, and intricate electronic components. To maintain the pristine condition of its cabin, especially on high-contact surfaces like the steering wheel, display screens, and gear selector, applying Paint Protection Film (PPF) is crucial. This review details a comprehensive interior PPF application covering over 30 specific areas, designed to meet the high standards of Genesis owners.

Interior PPF, or Paint Protection Film, involves applying a transparent protective layer to frequently touched areas within a vehicle's cabin. Unlike exterior PPF, interior film is specifically designed to shield sensitive materials such as leather, plastics, and touchscreens from scratches, stains, and UV damage. For the Genesis GV70, this means safeguarding the luxurious full leather upholstery and the precise touch interfaces. Key areas like the steering wheel buttons, gear shifter, and center console display are subjected to hundreds of touches daily, making them prone to wear and tear. Interior PPF acts as a preventative measure to preserve these elements.

Expertise in Specific Application Areas

Steering Wheel and Button Clusters

The steering wheel and its associated buttons are among the most frequently handled parts of the interior, making them prime candidates for PPF. A critical step in this process is thorough degreasing to remove oils and contaminants from constant contact. Professional installation involves meticulously cleaning each area before applying the film. Inadequate degreasing can lead to the film lifting within a few months, significantly shortening its lifespan, especially in high-contact vehicles like the GV70.

Touch Display and Center Console

The panoramic touch display and the center console surrounding the gear selector are also essential areas for PPF application on the GV70. The touch screen, in particular, is susceptible to fingerprints and minor scratches. Applying PPF to these areas requires careful use of an installation solution to prevent excess liquid from seeping into electronic components, which could cause malfunctions. The key to professional installation lies in using the precise amount of solution and thoroughly drying all edges with an air gun.

Climate Control Panel and Door Trims

The rear climate control panel and the door trim moldings are also important. These areas are exposed to sunlight within the cabin, making them vulnerable to UV damage and surface wear. The GV70 often features premium aluminum trim, which can be protected with PPF to maintain its long-term aesthetic appeal and value.

Installation Process: A Step-by-Step Guide

Installation process:

1. Precision Degreasing: The initial and most critical step is thoroughly degreasing all surfaces. Interior areas accumulate oils, dust, and fingerprints, requiring at least three meticulous cleaning cycles with specialized chemicals to ensure proper film adhesion. Skipping this step often results in edge lifting within 2-3 months.
2. Film Application and Solution: After degreasing, the PPF is carefully applied. An installation solution is used to help the film conform precisely to curved surfaces and allow for repositioning.
3. Squeegee and Drying: Using specialized squeegees, installers meticulously remove the installation solution and any trapped air bubbles from beneath the film, ensuring a smooth, bubble-free finish.
4. Heat Curing: A heat gun is often used to gently cure the film, helping it to fully adhere and conform to the contours of the applied surface, enhancing its durability and clarity.